Akrilni špric kit

AKRILNI ŠPRIC KIT

Akrilni špric kit je najbolje vezivno sredstvo između poliester kita i lakiranja

 

Područje pripreme

Brzo i trajno popunjava i pokriva male neravnine, ogrebotine i tragove brušenja i daje glatku površinu za naknadno lakiranje. DC Akrilni šprickit je najbolje vezivno sredstvo između poliester kita i lakiranja

Kvalite

  • Može da se nanosi u više slojeva
  • Izuzetno visoka moć popunjavanja
  • Brzo sušenje dozvoljava brzo brušenje
  • Gas je bez CFC-a
  • Prvoklasni i visokovredni akrilni špric kit

Pokrivenost

  • Količina od 150 ml dovoljna je za oko 0,15 – 0,3 m² u zavisnosti od debljine sloja

Sušenje

  • Količina od 150 ml dovoljna je za oko 0,15 – 0,3 m² u zavisnosti od debljine sloja

Veličina

  • 210 ml Euro-can with 150 ml contents
  • 520 ml Euro-can with 400 ml contents

Product specification

Fills and coats small unevennesses, sratches and dragmarks, smoothes the surface and prepares it for painting. The acrylic spray putty is the ideal medium between DUPLI-COLOR polyester filler and final painting. Tamper-proof cap avoids unauthorized use.

Upotreba

Before using the can, read and observe carefully the handling instructions!

 

Remove dirt, grease and oil. Roughen the ground with type P240 to P360 abrasive paper. If the surface to be filled has already been roughened and evened out, grind it wet with abrasive paper. Remove dust thoroughly. Shake the can well for 3 minutes distance of spraying: approx. 25 – 30 cm. Apply DUPLI-COLOR spray putty with several thin layers. Wait 2 – 5 minutes between every spraying procedure and shake the can again before spraying. Depending on the weather, roughen the surface with type P400 to P500 abrasive paper after about 1 hour. For further painting please use DUPLI-COLOR filler and primer and DUPLI-COLOR acrylic auto spray.

 

 

Porudžbeni brojevi

 Boja   Proizvod   Pakovanje   Porudžbeni broj 
 Spritzspachtel 150  150 ml  409035
 Spritzspachtel 400  400 ml  409028

 

Close