Alu wheel paint

ALU WHEEL PAINT


For lacquering and repair works in the most current aluminium shades, especially for alloy rims

Optimal adhesion of the lacquer you'll achieve by using DUPLI-COLOR Primer before lacquering.

To protect the metal pigments in the lacquer, we recommend to seal the metallic lacquer with DUPLI-COLOR Tuning Wheel Paint Clear Coat art.no. 191671.

QUALITY AND PROPERTIES

  • High-grade, quick-drying nitro-combi paint
  • Good flow, smooth surface
  • Weather-resistant, light-proof, UV-resistant (non-yellowing)
  • Limited fuel-resistance
  • Good colour- and gloss retention
  • Hard surface, abrasion-resistant

PHYSICAL AND CHEMICAL DATA

  • Basis of the binder:nitro-comib
  • Colour:  aluminium shades
  • Smell:solvent
  • Degree of gloss(at measurement angle 60° acc. to DIN 67530):
    satin matt: 50 – 60 gloss units
    glossy: 80 gloss units after coating with Clear Lacquer
  • Efficiency:
    Depending on consistence and color of the ground:
    12 ml for small spots
    150 ml are sufficient for approx. 0.5 m²
  • Drying time (at 20°C, 50% relative air humidity):
    Dust-dry: after approx. 10 minutes
    Dry to touch: after approx. 30 minutes
    Coatable with 2-Coat Clear Lacquer: after approx. 30 minutes
    Cured: after approx. 24 hours
    The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
  • Temperature-resistant:up to 80°C
  • Storage stability:
    Aerosols: 10 years, touch-up pencils: 5 years, if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size: touch-up pencils 12 ml, aerosol cans, maximum nominal volume 150 ml

ENVIRONMENT AND LABELLING

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as “special refuse”.

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II,

USING INSTRUCTIONS

The most DUPLI-COLOR spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label.
Before use, carefully read and observe the warning texts on the label!

Application

Preparation of the ground:

  • Carefully clean rims from dirt, fat and brake-dust.
  • Treat existing pore rust with presto Deruster.
  • The ground has to be sanded, clean, dry and fat-free.
  • Mask off the rim edges with masking tape.
  • Use paper to protect surrounding area from spray-dust.
  • Prime with DUPLI-COLOR Primer.
  • After drying, slightly sand (sanding paper grain P600)

Lacquering:

  • Before use, shake the can vigorously for 3 minutes.
  • Test spray to check colour-matching.
  • Spray several thin coats in 3 – 5 minute intervals from a distance of approx. 25 cm.
  • After 30 minutes drying time, coat with DUPLI-COLOR Tuning Wheel Paint Clear Coat to protect the metal pigments in the lacquer.
  • Do not spray over synthetic paints!

TIPS FOR SPRAY PAINTING

Protect the object and the surrounding area from spray mist. When painting small areas it is recommended that a piece of card is used as a mask, with a hole cut in it slightly larger than the area to be sprayed. The mask should be held 1 to 2 cm from the surface. With this method, the mainly part of the spray mist is brought under control. It recommends to mask parts not to be lacquered, to protect the surrounding against the spray mist.

The aerosol can should have room temperature.

Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

 

ORDER INFORMATION

 Color   Product   Bundle   Art.No. 
 ALU WHEEL PAINT arctic 150  150 ml  665615
 ALU WHEEL PAINT argento 12  12 ml  665653
 ALU WHEEL PAINT argento 150  150 ml  665585
 ALU WHEEL PAINT artic 12  12 ml  665677
 ALU WHEEL PAINT quartz 12  12 ml  665691
 ALU WHEEL PAINT quartz 150  150 ml  665646
 ALU WHEEL PAINT viper 12  12 ml  665660
 ALU WHEEL PAINT viper 150  150 ml  665592
 * no color identification possible

The presentation of colors may deviate from the original color.


EXAMPLES FOR USE

DISCLAIMER OF LIABILITY

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.

For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.

As of April 17,  2015
This release replaces all eventually earlier issued versions.

 

PORUDŽBENI BROJEVI

 Color   Product   Bundle   Art.No. 
 ALU WHEEL PAINT arctic 150  150 ml  665615
 ALU WHEEL PAINT argento 12  12 ml  665653
 ALU WHEEL PAINT argento 150  150 ml  665585
 ALU WHEEL PAINT artic 12  12 ml  665677
 ALU WHEEL PAINT quartz 12  12 ml  665691
 ALU WHEEL PAINT quartz 150  150 ml  665646
 ALU WHEEL PAINT viper 12  12 ml  665660
 ALU WHEEL PAINT viper 150  150 ml  665592
  * no color identification possible

The presentation of colors may deviate from the original color.