Window and door spray paint


ColorMatic Window and Door Spray Paint provides good coverage and humidity regulation and is through the weather resistance suitable for indoor and outdoor usage. Due to excellent flow and professional jet atomisation the coating of larger areas is possible. High pigmentation and a fast drying time make it ideal for mobile use. Suitable for basic, intermediate and finish painting.

Ideal under time pressure and if mobility is required soon – even for larger surfaces.


  • High coverage
  • Humidity regulation (wood moisture < 15%)
  • Weather resistance, useable for indoors and outdoors
  • Easy to use and quick drying time
  • Professional atomization ensures that it can be used for larger surfaces
  • Useable for basic, intermediate and finish painting
  • Good blocking resistance


  • Basis of binder:synthetic resin
  • Colour:white satin gloss
  • Smell:solvent
  • Efficiency:
    Depending on consistence and colour of the ground:
    400 ml are sufficient for approx. 1,0 m²
  • Substrate:
    Wood, metal and old paints
  • Drying time (at 20°C, 50% relative air humidity):
    Dust-dry: after approx. 10 minutes
    Dry to touch: after approx. over night
    Ready for assembling: 24 h
    The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
  • Temperature resistance:to 80°C (short-term up to 100°C)
  • Storage stability:
    10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size:
    Aerosol cans, maximum nominal volume 400 ml
  • VOC-value:241,3 g


Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as “special refuse”.

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II,


Before use, carefully read and observe the warning texts on the label!

  • Cover surfaces not to be coated and cover the surrounding area
  • Remove rust and old paint from the surface to be painted, then sand and prime
  • The area must be dry and free of dust and grease
  • Shake can well for 3 minutes
  • Carry out spray test
  • Apply several thin coats at two-minutes intervals


Color   Product   Bundle   Art.No. 
 CM Fenster- Türenlack 400  400 ml  447341
* no color identification possible

The presentation of colors may deviate from the original color.



This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.

For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.

As of July 11, 2016
This release replaces all eventually earlier issued versions.



Color   Product   Bundle   Art.No. 
 CM Fenster- Türenlack 400  400 ml  447341
* no color identification possible

The presentation of colors may deviate from the original color.