MD 100 multi-spray

MD 100 MULTI-SPRAY

presto MD 100 Multi-Functional Spray is a high-quality, all-purpose oil for lubricating and protecting metal and rubber parts. Loosens tight screws and removes oil, tar, wax and residues of glue. It is perfect for all types of maintenance at home and in the workshop.

For use on:
Locks, garden tools, gears, pedals, tools, fittings, home trainers.

QUALITY AND PROPERTIES

  • Good penetration
  • Moisture repellent
  • Cleaning effect
  • Removes oil, wax, Tectyl and tar
  • Good corrosion protection
  • Excellent adhesion
  • Leaves no residue
  • Non-corrosive
  • Non-conductive
  • Powerful degreaser
  • Silicone-free
  • Directed jet spray
  • TRG 300 compliant

PHYSICAL AND CHEMICAL DATA

  • Basis:mineral oil
  • Colour:brownish
  • Smell:Vanillla
  • Relative density at 20°C:80 g/ml
  • Yield: 98 g/sec.
  • Vapour pressure at 20°C:3 – 4 bar
  • Temperature resistance:-50°C to +200°C
  • Storage stability:
    10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size:
    aerosol can, maximum nominal volume 400 ml

ENVIRONMENT AND LABELLING

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as “special refuse”.

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II,

USING INSTRUCTIONS

Before use, carefully read and observe the warning texts on the label!

Application:

  • Bring can to room temperature.
  • Operating temperature 5° to 30°C.
  • Shake can for 2 minutes before use.
  • Spray a thin coat and flash off.Optimum lubrication occurs once the solvent has evaporated.
  • After cleaning, an invisible protective film appears. 

ORDER INFORMATION

Color   Product   Bundle   Art.No. 
 *  Multifunktionsspray 150  150 ml  429965
 *  Multifunktionsspray 400  400 ml  157165
 * no color identification possible

The presentation of colors may deviate from the original color.

EXAMPLES FOR USE

DISCLAIMER OF LIABILITY

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.

For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.

As of: March 12, 2014
This release replaces all eventually earlier issued versions.

 

PORUDŽBENI BROJEVI

Color   Product   Bundle   Art.No. 
 *  Multifunktionsspray 150  150 ml  429965
 *  Multifunktionsspray 400  400 ml  157165
 * no color identification possible

The presentation of colors may deviate from the original color.

Close