Chassis-colour

CHASSIS-COLOUR


ColorMatic chassis color is a premium, satin-finished acrylic coat for the quick coating of commercial vehicle chassis. Thanks to the broad-jet atomisation, it can also be used on larger surfaces. An extremely high content of pigments and specific additives provides high coverage, high film thickness, good hold and adhesion direct on metal.

To best prepare, thoroughly clean the surface to be painted with ColorMatic Silicone Remover no. 174469 and as required, apply a primer or filler (e.g. ColorMatic 2K Primer Filler, Art.Nr. 195327). In addition, we recommend the use of ColorMatic Spot Blender no. 114229 for spot repair to the edges.

Application:
Ideal for spot repairs and refinishing parts.

QUALITY AND PROPERTIES

  • High-quality acrylic coat
  • Simple application
  • Professional jet atomization ensures that it can be used on larger surfaces.
  • Extremely high pigmentation and specific additives provide high coverage
  • High film thickness with good hold
  • Light blending

PHYSICAL AND CHEMICAL DATA

  • Basis of binder:Acrylic
  • Colour: Specific
  • Smell:solvent
  • Degree of gloss:(at measurement angle 60° acc. to DIN 67530)
    glossy: 80 gloss units
    satin glossy: 30 gloss units
    matt: 10 gloss units
  • Efficiency:
    Depending on consistence and colour of the ground:
    400 ml are sufficient for approx. 0,8 – 1,0 m²
  • Substrate:
    ColorMatic 2K Primer Filler no. 195 327
    ColorMatic 1K Primer for Aluminium no. 190 278
    ColorMatic 1K Primer for Zinc no. 190 285
    ColorMatic 1K Epoxy Primer no. 174 414
    ColorMatic 1K Filler, beige, no. 856 556
    ColorMatic 1K Filler, grey, no. 874 987
    ‘Cured paint, polished
  • Drying time (at 20°C, 50% relative air humidity):
    Dust-dry: after approx. 10 minutes
    Dry to touch: after approx. 30 minutes
    The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
  • Temperature resistance:to 80°C
  • Storage stability:
    10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size:
    Aerosol cans, maximum nominal volume 400 ml
  • VOC-value:240,1g

ENVIRONMENT AND LABELLING

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as “special refuse”.

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II,

USING INSTRUCTIONS

Before use, carefully read and observe the warning texts on the label!

  • Clean the surface to be painted thoroughly withColorMatic Silicone Remover no. 174469, then sand
  • The area must be dry and free of dust and grease
  • Shake can vigorously for 2 minutes
  • Carry out spray test
  • 2-3 coats
  • For professional use only
  • Wear an appropriate respirator (recommended type A2/P3)

ORDER INFORMATION

Color   Product   Bundle   Art.No. 
 CM IV 105 ivecorot sdgl. 400  400 ml  892219
 CM MAN RAL3002 karminr.sdgl400  400 ml  856730
 CM MB arg.grau DB7354 matt 400  400 ml  357855
 CM MB7350 novagrau sdgl. 400  400 ml  856761
 * no color identification possible

The presentation of colors may deviate from the original color.

EXAMPLES FOR USE

DISCLAIMER OF LIABILITY

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.

For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.

As of July 26, 2010
This release replaces all eventually earlier issued versions

 

PORUDŽBENI BROJEVI

Color   Product   Bundle   Art.No. 
 CM IV 105 ivecorot sdgl. 400  400 ml  892219
 CM MAN RAL3002 karminr.sdgl400  400 ml  856730
 CM MB arg.grau DB7354 matt 400  400 ml  357855
 CM MB7350 novagrau sdgl. 400  400 ml  856761
 * no color identification possible

The presentation of colors may deviate from the original color.