QUALITY AND PROPERTIES

• High-grade nitro-combi quality
• Very good coverage
• Excellent adhesion
• Good flow, smooth surface
• Quick-drying
• Suitable for indoors and outdoors applications
• Weather-resistant, light-proof, UV-resistant
• Scratch-, shock- and impact-resistant
• High surface hardness and good elasticiy
• Polishable, dirt-resistand surface
• Limited resistance against petrol

PHYSICAL AND CHEMICAL DATA

• Basis of the binder:nitro-combi
• Colour: black mat or glossy and white glossyd
• Smell:solvent
• Degree of gloss(at measurement angle 60° acc. to DIN 67530):
  glossy: 80-85 gloss units
  matt: 10-20 gloss units
• Efficiency:
  Depending on consistence and color of the ground:
  500 ml are sufficient for approx. 1.6 m²
• Drying time (at 20°C, 50% relative air humidity):
  Dust-dry: after approx. 10 minutes
  Dry to touch: after approx. 50 minutes
  Cured: after approx. 24 hours
  The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
• Temperature-resistant:up to 80°C
• Storage stability:
  10 years, if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
• Size: aerosol cans, maximum nominal volume 500 ml

ENVIRONMENT AND LABELLING

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as “special refuse”.

Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II,

USING INSTRUCTIONS

The most presto spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label.
Before use, carefully read and observe the warning texts on the labels!

Application

Preparation of the ground:

• Clean underground from dirt, fat and rust.
• Fill and sand uneven surfaces.
• If no filling with putty is necessary, apply a primer
• Otherwise apply Filler on the fine-sanded filled surfaces. Before that, generously mask off the repair spot.
• If bigger areas have to be repaired, we recommend to mask off edges of the car body.

Lacquering:

• The surface has to be clean, dry and free from fat.
• Mask off areas not to be painted.
• Before use, shake the can vigorously for 3 minutes.
• Test spray to check colour-matching.
• The spray distance should be approx. 20-30 cm.
• Spray several thin cross-coats in 3 – 5 minute intervals.
• Do not spray over synthetic paints!

TIPS FOR SPRAY PAINTING

Protect the object and the surrounding area from spray mist. When painting small areas it is recommended that a piece of card is used as a mask, with a hole cut in it slightly larger than the area to be sprayed. The mask should be held 1 to 2 cm from the surface. With this method, the mainly part of the spray mist is brought under control. It recommends to mask parts not to be lacquered, to protect the surrounding against the spray mist.

The aerosol can should have room temperature.

Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!

ORDER INFORMATION

Color	Product	Bundle	Art.No.
	presto Rallye schwarz sdm 500	500 ml	385810
	presto Rallye weiß sdm 500	500 ml	385803
	presto schwarz gl. 500	500 ml	428948
	presto schwarz matt 500	500 ml	428955
	presto weiss gl. 500	500 ml	428962

EXAMPLES FOR USE

DISCLAIMER OF LIABILITY

This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.

For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.

As of April 29, 2010.
This release replaces all eventually earlier issued versions.

 

PORUDŽBENI BROJEVI

Color	Product	Bundle	Art.No.
	presto Rallye schwarz sdm 500	500 ml	385810
	presto Rallye weiß sdm 500	500 ml	385803
	presto schwarz gl. 500	500 ml	428948
	presto schwarz matt 500	500 ml	428955
	presto weiss gl. 500	500 ml	428962