RAL ACRYLIC SPRAY PAINT
High-quality acrylic lacquer in standard shades according to the RAL standard. Exact matching paintings and repairs of small damages in RAL colours.
Specially for machines, engine parts, tools, all kinds of vehicles, steel furniture and much more.
This assortment includes besides many RAL and special shades a glossy and a matt clear coat.
QUALITY AND PROPERTIES
- High-grade acrylic quality
- Very good coverage
- Very good colour-matching
- Excellent adhesion on many materials
- Good flow, smooth surface
- Suitable for indoors and outdoors applications
- Polishable surface
- Weather-resistant, light-proof, UV-resistant
- Scratch-, shock- and impact-resistant
PHYSICAL AND CHEMICAL DATA
- Basis of the binder:Acrylic copolymers
- Colour: diverse
- Degree of gloss(at measurement angle 60° acc. to DIN 67530):
glossy: 80 gloss units
satin matt: 30 – 35 gloss units
matt:5 – 10 gloss units
Depending on consistence and color of the ground:
12 ml for small spots
150 ml are sufficient for approx. 0.3 – 0.6 m² depending on colour
400 ml are sufficient for approx. 1.0 – 2.0 m² depending on colour
- Drying time (at 20°C, 50% relative air humidity):
Dust-dry: Spray after approx. 10 minutes; touch-up pencil after 15 minutes
Dry to touch: Spray after approx. 30 minutes, touch-up pencil after 40 minutes
Coatable with 2-Coat Clear Lacquer: after approx. 30 minutes
Cured: Spray after 2 hours, touch-up pencil after approx. 24 hours
Can be polished: after approx. 24 hours
The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
- Temperature-resistant:up to 80°C
- Storage stability:
Aerosols: 10 years, touch-up pencils: 5 years, if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
- Size: touch-up pencils 12 ml, aerosol cans, maximum nominal volume 150 ml resp. 400 ml
ENVIRONMENT AND LABELLING
Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.
Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as “special refuse”.
Labelling: All products of MOTIP DUPLI comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II,
The most DUPLI-COLOR spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label.
Before use, carefully read and observe the warning texts on the label!
- Remove rust and dirt.
- The surface has to be clean, dry and free from fat.
- If necessary, apply a primer
- Cover areas not to be painted.
- Before use, shake the can resp. the touch-up pencil for 2-3 minutes.
- Test spray to check colour-matching and compatibility.
- Spray: apply from a distance of approx. 25 cm several thin cross-coats.
Touch-up pencils: Apply a thin coat with the brush.
- Do not apply on synthetic paints!
TIPS FOR SPRAY PAINTING
Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.
Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels!
|DS 1013 perlweiß gl. 12||12 ml||676932|
|DS 1015 hellelfenbein gl. 12||12 ml||676949|
|DS 1021 rapsgelb gl. 12||12 ml||676956|
|DS 3000 feuerrot gl. 12||12 ml||676994|
|DS 3003 rubinrot gl. 12||12 ml||677007|
|DS 3020 verkehrsrot gl. 12||12 ml||677021|
|DS 5010 enzianblau gl. 12||12 ml||676604|
|DS 6005 moosgrün gl. 12||12 ml||677106|
|DS 7001 silbergrau gl. 12||12 ml||677137|
|DS 7016 anthrazitgrau gl. 12||12 ml||677144|
The presentation of colors may deviate from the original color.
EXAMPLES FOR USE
DISCLAIMER OF LIABILITY
This application-technological information is given to the best of our knowledge. The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application. The use and processing is beyond our control and therefore exclusively in the responsibility of the user. MOTIP DUPLI is let off the liability, unless the liability-based incident is caused by a fault incurred to MOTIP DUPLI.
For any further technical questions call our hotline +49 (0) 62 66 75-266 from Monday to Thursday from 9 h a.m. to 3 h p.m. or on Friday until 12 h p.m.
As of September 27, 2012
This release replaces all eventually earlier issued versions.
The presentation of colors may deviate from the original color. * no color identification possible